HP Matrix Operating Environment 7.0 Integrity CMS Installation and Configuration Guide (7.0 and 7.1)

4. Configure Matrix OE for HP-UX by entering the following command:
# /opt/vse/bin/vseinitconfig -a
The vseinitconfig command logs status, errors, and exceptions to the file /var/opt/
vse/logs/vseinitconfig.log. Review the output of this command to ensure there are
no errors.
IMPORTANT: If you are upgrading from a previous version of Matrix OE for HP-UX, the
vseinitconfig command migrates any product licenses that were previously installed or
scanned to the Systems Insight Manager License Manager database. Review the licensing
information in the log file to make sure that it is correct. You may need to adjust the number
of licensed cores using the vselicense command. For more information about migrating
previous licenses to the new license model, see vselicense(1M) and the HP Insight Management
Getting Started Guide.
5. When vseinitconfig finishes, you are prompted to restart Systems Insight Manager. Type
“y” and press Enter to restart Systems Insight Manager.
6. (Optional) Execute the command catman to make sure that the Matrix OE for HP-UX manpages
can be listed by keyword using man -k.
Procedure 5 Install Matrix OE for HP-UX using existing installation of Systems Insight Manager
1. Enter the following command on the CMS:
# /usr/sbin/swinstall -x autoreboot=true \
-s path-to-depot-file VSEMgmt
2. Configure Matrix OE for HP-UX by entering the following command:
# /opt/vse/bin/vseinitconfig -a
The vseinitconfig command logs status, errors, and exceptions to the file /var/opt/
vse/logs/vseinitconfig.log. Review the output of this command to ensure there are
no errors.
IMPORTANT: If you are upgrading from a previous version of Matrix OE for HP-UX, the
vseinitconfig command migrates any product licenses that were previously installed or
scanned to the Systems Insight Manager License Manager database. Review the licensing
information in the log file to make sure that it is correct. You may need to adjust the number
of licensed cores using the vselicense command. For more information about migrating
previous licenses to the new license model, see vselicense(1M) and the HP Insight Management
Getting Started Guide.
3. When vseinitconfig finishes, you are prompted to restart Systems Insight Manager. Type
“y” and press Enter to restart Systems Insight Manager.
4. (Optional) Execute the command catman to make sure that the Matrix OE for HP-UX manpages
can be listed by keyword using man -k.
IMPORTANT: If you are reinstalling or updating an existing installation, you might have already
performed the steps in the following sections. However, you might need to repeat some of these
steps after reinstallation or upgrade. In particular, see “Configure Matrix OE for HP-UX” (page 21).
You need to repeat the postinstallation configuration steps listed there, including license management
and Application Discovery certificate exchange.
Start and configure Systems Insight Manager
After installation, use Procedure 6 to start Systems Insight Manager and run the First Time Wizard
to finish the configuration process.
Start and configure Systems Insight Manager 13