HP Matrix Operating Environment 7.0 Integrity CMS Installation and Configuration Guide (7.0 and 7.1)

NOTE: The product description indicates whether the selected OpenPegasus package is
specific to Matrix OE for HP-UX.
4. Click the Download button to download the package.
Procedure 15 Install OpenPegasus WBEM
After downloading the OpenPegasus package, install it and start OpenPegasus WBEM Services
on the system.
1. Login to the Linux system as root and run the following command to install the package:
# rpm –Uvh tog-pegasus-version.distro.arch.rpm
2. Start OpenPegasus WBEM Services by running the following command as the root user:
# /etc/init.d/tog-pegasus start
At this point the Linux managed system has OpenPegasus WBEM installed and configured. The
next steps provide information on how to configure the CMS to enable VSE Agent Distributor for
Matrix OE for HP-UX agents.
Additional configuration steps
If your Linux system is not an Systems Insight Manager managed system yet, refer to the “Setting
Up Managed Systems” section of the HP Systems Insight Manager Installation and User Guide
available at http://www.hp.com/go/insightmanagement/sim/. This document also contains
information on how to configure WBEM credentials for a Linux system.
At this point users can install VSE Agents onto the Linux managed systems, necessary for Insight
Management. Refer to “Install Insight Management agent software and configure managed systems”
(page 15) for instructions on how to install HP WBEM Providers onto Linux managed systems.
20 Installation