HP Matrix Operating Environment 7.0 Integrity CMS Installation and Configuration Guide (7.0 and 7.1)

vseinitconfig(1M)
NAME
vseinitconfig -- Configure or unconfigure Matrix OE
SYNOPSIS
Path (HP-UX): /opt/vse/bin/vseinitconfig
Path (Windows): install-path\bin\vseinitconfig
vseinitconfig [ -a | --initconfig ] [ -F | --clobber ] [ -q | --quiet
]
[-x restart_sim= { true | false }]
(Initial software configuration)
vseinitconfig { -r | --unconfig } [ -F | --clobber ] [ -q | --quiet ]
[-x restart_sim= { true | false }]
(Unconfigure software for removal)
vseinitconfig { -b | --backup } { -d path | --dir=path }
(Backup the PostgreSQL database on HP-UX CMS)
vseinitconfig { -s | --restore } { -d path | --dir=path } { -F |
--clobber }
(Restore the PostgreSQL database on HP-UX CMS)
DESCRIPTION
The vseinitconfig command performs initial configuration of HP Matrix Operating Environment
on the Central Management Server (CMS). It can also be used to remove the existing configuration
and to back up or restore the Matrix OE database. Backup and restore functions are only available
on a CMS running HP-UX using the PostgreSQL database. The vseinitconfig command is
installed with Matrix OE on both HP-UX and Microsoft® Windows® CMS.
This command performs four different functions on the CMS, corresponding to the four syntax
options shown in the synopsis. With no options specified, the initial configuration function is
performed.
1. Initial configuration after installing or updating Matrix OE on the CMS. This includes initial
configuration of HP Matrix OE visualization, HP Global Workload Manager (gWLM), and
Capacity Advisor, as well as initialization of the Matrix OE database.
2. Removal of Matrix OE menu items and actions from HP Systems Insight Manager (HP SIM)
and clearing of the Matrix OE database, in preparation for removal of Matrix OE.
3. Safe backup of the Matrix OE database to protect against loss of data (only on a CMS running
HP-UX using the PostgreSQL database).
4. Safe restore of the Matrix OE database from a previous backup (only on a CMS running
HP-UX using the PostgreSQL database).
Options
The vseinitconfig command recognizes the following options. Each option can be expressed
in a long or short form.
If no options are specified, the initial configuration function is performed.
-a|--initconfig Perform the initial configuration of Matrix OE. This action
requires that HP SIM is running and configured with the
mxinitconfig command. This command registers Matrix
OE tools, toolboxes, and actions with HP SIM and initializes
the Matrix OE database.
On a Microsoft Windows CMS, vseinitconfig -a is
automatically invoked by the installer. On an HP-UX CMS,
you must execute the command after installing the software
31