HP Matrix Operating Environment 7.0 Integrity CMS Installation and Configuration Guide (7.0 and 7.1)

3 Installation
Install Systems Insight Manager and Matrix OE for HP-UX using Table 1.
IMPORTANT: Starting with VSE Management Software version 4.0 (A.04.00.07.xx), licenses
for Matrix OE for HP-UX are managed in the Systems Insight Manager License Manager database
on the CMS. When you upgrade an HP-UX CMS that has a previous version of Matrix OE for
HP-UX installed, any product licenses that were previously installed or scanned are automatically
migrated to the License Manager database. For more information about migrating previous licenses
to the new license model, see vselicense(1M) and the HP Insight Management Getting Started
Guide.
Overview checklist for installing Matrix OE for HP-UX
Use Table 1 for an overview of the installation process for Matrix OE for HP-UX on an HP-UX CMS.
Table 1 Checklist for installing Matrix OE for HP-UX on an HP-UX CMS
InformationTask
Matrix OE for HP-UX is available as a single
download from the Software Depot website:
Obtain Matrix OE for HP-UX installation package.
IMPORTANT: The software includes a 90-day trial license for HP
9000 and HP Integrity managed systems. For details about Matrix
OE for HP-UX licenses, see the HP Insight Management Getting
Started Guide.
□
http://h20293.www2.hp.com/portal/
swdepot/displayProductInfo.do?
productNumber=vse
“Prepare for installation” (page 8)Prepare for Matrix OE for HP-UX installation by installing the required
software and patches, establishing common WBEM user credentials
□
on the CMS and managed systems, and completing preinstallation
steps for Linux and Microsoft Windows managed systems.
“Install the software on the CMS” (page 11)Install Systems Insight Manager and Matrix OE for HP-UX on the
CMS.
□
“Start and configure Systems Insight
Manager” (page 13)
If Systems Insight Manager was upgraded, launch Systems Insight
Manager and run the First Time Wizard and the Discovery processes.
□
“Install Insight Management agent software
and configure managed systems” (page 15)
Install the WBEM providers and other agent software on your
managed systems.
□
“Configure Matrix OE for HP-UX” (page 21)Configure Matrix OE for HP-UX for your environment.
□
IMPORTANT: Matrix OE for HP-UX does not operate correctly until
you complete these postinstallation configuration steps. You must
perform these steps even when you are reinstalling or updating an
existing installation.
Overview checklist for upgrading Matrix OE for HP-UX
Use Table 2 for an overview of the upgrade process for Matrix OE for HP-UX on an HP-UX CMS.
Overview checklist for installing Matrix OE for HP-UX 7