Building Disaster Recovery Serviceguard Solutions Using Metrocluster with 3PAR Remote Copy

Table 6 Error Messages and their Resolution (continued)
ResolutionCauseLog Messages
If the cmviewcl command failure is due
to memory, network or CPU transient
reformation or transient
error conditions.
or
Execution of cmviewcl -f line –s config failed
error conditions, fix the issue and restart
the Site Controller package.
or
Execution of cmviewcl -v -f line –s config failed
Fix the issue that resulted in the failure
of CVM commands, and then restart the
Site Controller package.
This message is logged
because the CVM
commands failed.
Error: Not able to find CVM master node to
import CVM DG(s)
or
Error Failed to start the CVM DG
<cvm_dg_name> Volumes
Troubleshooting Metrocluster SADTA 67