Building Disaster Recovery Serviceguard Solutions Using Metrocluster with Continuous Access EVA A.05.01

The following prerequisites and limitations apply in package easy deployment for Metrocluster
with Continuous Access EVA:
Prerequisites
1. The replication pair must be created.
2. A supported version of the evainfo tool must be installed.
3. The Metrocluster version in all nodes of the cluster must have PHSS_41660 or later.
4. The /etc/dtsconf/caeva.map file must be created and distributed.
5. The SMI-S servers must be reachable.
Limitations
1. The node name in Command View and the node name in the cluster configuration file must
be same.
2. The active management server should be listed in the caeva.map file.
3. This is not supported on Metrocluster configurations having HP Integrity Virtual Machines
guests or Virtual Partitions 6.0 or greater as Serviceguard nodes.
4. If enclosure based naming scheme is used by Veritas Volume manager, package easy
deployment of Metrocluster packages is not supported.
Installing and configuring an application 33