Building Disaster Recovery Serviceguard Solutions Using Metrocluster with Continuous Access EVA A.05.01

DC1_STORAGE_WORLD_WIDE_NAME The world wide name of the HP P6000/EVA storage system
that resides in Data Center 1. This storage system name is
defined when the storage is initialized.
DC1_SMIS_LIST A list of the management servers that reside in Data Center
1. Multiple names can be defined by using commas as
separators.
If a connection to the first management server fails, attempts
are made to connect to the subsequent management servers
in their order of specification.
DC1_HOST_LIST A list of the clustered nodes that reside in Data Center 1.
Multiple names can be defined by using commas as
separators.
DC2_STORAGE_WORLD_WIDE_NAME The world wide name of the HP P6000/EVA storage system
that resides in Data Center 2. This storage system name is
defined when the storage is initialized.
DC2_SMIS_LIST A list of the management servers that reside in Data Center
2. Multiple names can be defined by using commas as
separators.
If a connection to the first management server fails, attempts
are made to connect to the subsequent management servers
in their order of specification..
DC2_HOST_LIST A list of the clustered nodes that reside in Data Center 2.
Multiple names can be defined by using commas as
separators.
QUERY_TIME_OUT (Default 300
seconds)
Sets the time in seconds to wait for a response from the
SMI-S CIMOM in storage management appliance. The
minimum recommended value is 20 seconds. If the value is
set to be smaller than 20 seconds, Metrocluster software
may time out before getting the response from SMI-S, and
the package fails to start with an error.
85