Building Disaster Recovery Serviceguard Solutions Using Metrocluster with Continuous Access EVA P6000 for Linux B.12.00.00

D mceva.conf file
##############################################################
## mceva.conf CONFIGURATION FILE (template) for use with ##
## the evadiscovery utility in the Metrocluster Continuous ##
## Access EVA Environment. ##
## Version: A.01.00 ##
## Note: This file MUST be edited before it can be used. ##
## For complete details about EVA configuration for use ##
## with Metrocluster Continuous Access EVA, consult the ##
## manual “Designing Disaster Tolerant High Availability ##
## Clusters”. ##
##############################################################
## This file provides input to the evadiscovery utility, ##
## which you use to generate the /etc/dtsconf/caeva.map ##
## file. During Metrocluster Continuous Access EVA ##
## configuration, this file is copied to all cluster nodes. ##
## Edit the file to include the appropriate data about the ##
## EVA storage systems and DR groups that will be used in ##
## your Metrocluster Continuous Access EVA environment. ##
## After entering all the desired information, run the ##
## evadiscoverycommand to generate the mapping data and save##
## it in a map file. ##
## Note: Before running evadiscovery, you need to use the ##
## smispasswd command to create a SMI-S services ##
## configuration. ##
## Enter the data for storage device pairs and DR groups ##
## after the <storage_pair_info> and <dr_group_info> tags. ##
## The <storage_pair_info> tag represents the starting ##
## definition of a storage pair and its DR groups. Under a ##
## <storage_pair_info> tag, you must provide two storage ##
## Node World Wide Name (WWN)which both contain the DR groups##
## defined under the <dr_group_info> tag. You can define as ##
## many DR groups as you need, but each DR group must belong ##
## to only one of the storage pairs. A storage pair can have ##
## a maximum of 64 DR groups. ##
## Note that you can find storage Node World Wide Names form ##
## the front panel of your P6000 controllers or from the ##
## ‘Initialized Storage Properties’ page of command view ##
## EVA through your Web browser. ##
## Below is an example of a configuration with two storage ##
## pairs (4 storage units). The first storage pair contains ##
## 2 DR groups and the second pair contains 1 DR group. ##
## <storage_pair_info> ##
## “5000-1FE1-5000-4280” Enter first storage WWN in double ##
## quotes. ##
## “5000-1FE1-5000-4180” Enter second storage WWN in double ##
## quotes. ##
## <dr_group_info> ##
## “DR Group - Package1” Enter a DR group name in double ##
## quotes. ##
## “DR Group - OracleDB1” Enter a DR group name in double ##
## quotes. ##
## <storage_pair_info> ##
## “5000-1FE1-5000-4081” Enter first storage WWN in double ##
## quotes. ##
## “5000-1FE1-5000-4084” Enter second storage WWN in double ##
## quotes. ##
## <dr_group_info> ##
## "DR Group - Package2” Enter a DR group name in double ##
## quotes. ##
## Note:Since '#’ meant a start of a comment, you cannot ##
## include the ‘#’ in any <storage_pair_info>, ##
42 mceva.conf file