Building Disaster Recovery Serviceguard Solutions Using Metrocluster with Continuous Access XP P9000 for Linux B.12.00.00

Table 7 Metrocluster Log Messages and their resolution (continued)
ResolutionCauseLog Messages
Resume the replication of the device
group using “pairresync” command and
restart the package.
Replication link is failed and the
package is failed over to the SVOl site
in case of fence level “data” or
Local disk status: SVOL_PAIR Remote
disk status: <PVOL_PSUE |
PVOL_PDUB>ERROR: CA link is down;
“never”. AUTO_NONCURDATA is setSVOL may not contain current data.
to “0” and FORCEFLAG file is not
present under the package directory.
The package is currently configured
not to start under these circumstances.
Create the file <FORCEFLAG_FILE>if
you really want to startup the package
on this host. Exiting.
Resume the replication of the device
group using “pairresync” command and
restart the package.
Replication of the device group is
suspended manually and the package
is failed over to the SVOl site.
Local disk status: SVOL_PSUS Remote
disk status: PVOL_PSUS Package is
not configured to run from this host
AUTO_SVOLPSUS is set to “0” andunder these conditions. Create the file
FORCEFLAG file is not present under
the package directory.
<FORCEFLAG_FILE>if you really want
to startup the package on this host.
Exiting.
If application availability is more
important than data currency on the
Replication link is failed and the
package is failed over to the SVOl site
Local disk status: SVOL_PSUE Remote
disk status: <PVOL_PSUE |
other site, create a FORCEFLAG filein case of fence level “async”.EX_ENORMT | EX_CMDIOE>Package
under the package directory usingAUTO_SVOLPSUE is set to “0” andis not configured to run from this host
touch <packageFORCEFLAG file is not present under
the package directory.
under these circumstances. Exiting to
allow startup attempt on another host. directory>/FORCEFLAG, and then
Create the file <FORCEFLAG_FILE>if restart the package. Once the link is
you really want to startup the package
on this host.
restored, issue pairresync command to
restore the replication.
If application availability is more
important than data currency on the
Continuous Aceess journal replication
is being used and the replication link
Local disk status: SVOL_PSUS Remote
disk status: <PVOL_PFUS |
other site, create a FORCEFLAG fileis failed. The package is failed overEX_ENORMT | EX_CMDIOE>Package
under the package directory usingto the SVOL site. AUTO_SVOLPFUS isis not configured to run from this host
touch <packageset to “0” and FORCEFLAG file is not
present under the package directory.
under these circumstances. Exiting to
allow startup attempt on another host. directory>/FORCEFLAG, and then
Create the file <FORCEFLAG_FILE>if restart the package. Once the link is
you really want to startup the package
on this host.
restored, issue pairresync command
to restore the replication.
If the replication link is proper, create
a FORCEFLAG file under the package
RAID Manager instances on the other
site are not available due to either
Local disk status: SVOL_PAIR Remote
disk status: <EX_ENORMT |
directory using touch <packagenodes/RAID Manager instances beingEX_CMDIOE> ERROR: The SVOL may
directory>/FORCEFLAG, and then
restart the package
down on the other site. The data is
current if the replication link is proper.
not contain current data The package
is currently configured not to start
If the replication link is failed ans
theapplication availability is more
under these circumstances. If you
really want to start the package up
create the file <FORCEFLAG_FILE>
and restart the package. Exiting.
important than data currency, create a
FORCEFLAG file under the package
directory using touch <package
directory>/FORCEFLAG, and then
restart the package. Once the link is
restored, issue pairresync command
to restore the replication.
Check which site has the latest data.This message is logged when the
following conditions are met:
Package is configured to not startup
underthe conditions detected with
primary as PVOL_PSUS and
• If you want the data on PVOL side,
then issue following commands to• The device group was manually
suspended.
thesecondary as SSWS. Create the
file <FORCEFLAG_FILE> if you really
discard changes made on the SVOL
side and resynchronize the data
from PVOLto SVOL.
# pairsplit –g
<device_group> -RB
• The package failed over to the
other site in a Metrocluster
want to startup the package on this
host Exiting.
• Package was started successfully
on the other site as either
Troubleshooting Metrocluster 49