README for the HP Neoview Management Dashboard Client (R2.4)

9. After a connection is established, you can run the Dashboard Client from the Windows Start
menu. Select Start→All Programs→Neoview Management Dashboard:
Post-Installation Instructions
If you are installing the Dashboard Client software on the Neoview Console, follow these
additional instructions to ensure that HP Support can remotely connect to the Neoview Console.
NOTE: This workaround implies that multiple instances of the Dashboard Client can be running
a single workstation, a configuration not currently supported because of potential name-space
conflicts associated with different Dashboard Active-X components, files, Windows registry
settings, and so on.
1. Start the Dashboard Client in Setup mode.
2. From the menu bar, select View→ Options. A Password window opens on top of the
Properties window.
3. Enter the password, and select OK.
4. Select the SSG tab, and then select Advanced. The SSG/CSG Advanced window opens.
5. In Name Options, uncheck Term Name, and select OK.
6. On the Permanent Change Warning, select Yes.
7. Close the Dashboard Properties window by clicking OK.
8. Shut down Dashboard, and CSG if it is running.
16