Setup Guide
English
Use the printer
6
Install and use the battery
Battery safety
• Use only the battery designed specically for the printer. For more information, see the user guide.
• When discarding a battery, contact your local waste disposal provider regarding local restrictions on the
disposal or recycling of batteries. Though the lithium-ion rechargeable battery is mercury-free, it might
require recycling or proper disposal at end-of life. For more information, see the user guide.
• The battery might explode if incorrectly replaced or disposed of in re. Do not shortcircuit the battery.
• To purchase a replacement battery, contact your local dealer or HP sales ofce. For more information, see
the user guide.
• To avoid risk of re, burns, or damage to the battery, do not allow a metal object to touch the battery
contacts.
• Do not disassemble the battery. The battery has no serviceable parts inside.
• Handle a damaged or leaking battery with extreme care. If you come in contact with the electrolyte, wash
the exposed area with soap and water. If it contacts the eye, ush the eye with water for 15 minutes and
seek medical attention.
• Do not expose the battery to storage temperatures above 60°C (140°F) or below -20° C (-4°F).
Charging the battery
• Charge the battery for 4 hours before using the battery for the rst time. For subsequent charges, it takes
approximately 3 hours to fully charge the battery.
• The battery charge light is amber when the battery is charging. If it is red, the battery might be faulty and
need to be replaced.
• The battery status light is green when the battery is 41-100% charged, amber when 10-40% charged, red
when less than 10% charged, and blinks red when less than 2% charged. Charge the battery when the
battery status light turns amber. If it turns red, charge the battery as soon as possible. The battery status is
also displayed in the Toolbox (Windows) and the HP Utility (Mac OS X). If you are using a Microsoft
Windows Mobile
®
device, you can use the Toolbox software for PDAs. For more information, see the user
guide.
• If the battery is running low, either plug in the power cord to charge it or replace the battery with one that is
charged.
A lithium-ion rechargeable battery comes with the printer in some
countries/regions. It is also available for purchase as an optional
accessory.
For more information about ordering and using the battery, see the user
guide (which is available on your computer after you install the software).