User Guide

HP is committed to helping customers reduce their environmental footprint. HP has
provided these features to help you focus on ways to assess and reduce the impact of
your printing choices.
For more information about HP's environmental initiatives, visit
www.hp.com/hpinfo/
globalcitizenship/environment/.
Manage power
To conserve electricity and extend the length of time you can use the printer, the
printer comes with the following features:
• Sleep mode
Power usage is reduced while in Sleep mode. After initial setup of printer, the
printer will enter Sleep mode after 10 minutes of inactivity. The time to Sleep
mode cannot be changed.
• Auto-Off
Auto Power-Off is automatically enabled by default when you turn on the printer.
When Auto Power-Off is enabled, the printer will automatically turn off after 15
minutes of inactivity to help reduce energy use. The feature is turned on
regardless of whether the printer is running on battery power or connected to a
power outlet. You can change the setting from the control panel. Once you
change the setting, the printer will maintain the setting that you choose. Auto
Power-Off turns the printer off completely, so you must use the power button to
turn the printer back on.
◦ To change the Auto Power-Off setting from the printer control panel
To turn off the feature, press and hold the
(Bluetooth) button and the
(Cancel) button simultaneously for at least 5 seconds, and then release
the buttons. To turn it on, repeat the same.
NOTE: To find out the currently set time, when the printer is ready,
press and hold the
(Cancel) button for at least 3 seconds. A page will
be printed with the time indicated. In addition, even when Auto Power-
Off is turned off, the printer will enter Sleep mode after 10 minutes of
inactivity.
◦ To change the Auto Power-Off setting from the printer software
Windows: Open Toolbox. (For more information, see
Toolbox (Windows).)
In the Services tab, click Power Settings, and then select the preferred
amount of time.
Mac OS X: Open HP Utility. (For more information, see
HP Utility (Mac OS
X).) In the Printer Settings section, click Power Management, and then
select the preferred amount of time.
In addition, try the following:
•
Turn off Bluetooth when not in use. To turn off Bluetooth, press the
(Bluetooth)
button on the printer’s control panel.
• To maximize battery life and capacity, be sure to charge, use, and store the
battery in places that meet the recommended temperature guidelines. For more
information about using the battery, see
Install and use the battery.
Conserve printing supplies
Chapter 1
8 Get started