User Guide
To conserve printing supplies such as ink and paper, try the following:
• Change the print mode to a draft setting. Draft setting uses less ink.
• Do not clean the ink cartridges unnecessarily. This wastes ink and shortens the
life of the cartridges.
• Reduce paper usage by printing on both sides of the paper. For more information,
see
Print on both sides (duplexing).
Understand the printer parts
• Front view
•
Back and side view
•
Printing supplies area
•
Control Panel
•
Bottom view
Front view
1 Media width guide – Adjusts to accommodate different media sizes.
2 Input tray – Holds the media. Remove media and close this tray when the printer is not
in use.
NOTE: If you are loading larger-size media, pull to extend the tray.
3 Narrow media guide – When sliding the media width guide to the right and against
narrow or small media, this guide automatically slides to the left slightly.
4 Front access cover – Provides access to the ink cartridges and for clearing paper jams.
This cover must be closed before printing can begin.
5 Output slot – Media exits the printer here.
Understand the printer parts 9