HP Insight Control for VMware vCenter Server Release Notes 7.2

Description
HP Insight Control for VMware vCenter Server (Insight Control for vCenter) is a single integrated
application that you use to manage HP ProLiant servers and/or HP storage systems. The application
consists of three modules. The core module is required along with one or two optional components:
the Server Module for vCenter and Storage Module for vCenter.
Core Module Provides the framework required by the Server Module for vCenter
and Storage Module for vCenter.
Server Module for vCenter Provides server hardware management capabilities, including
comprehensive monitoring, firmware update, ESX/ESXi image
deployment, remote control, end-to-end monitoring for Virtual Connect,
and power optimization for HP servers in the VMware environment.
Storage Module for vCenter Provides storage configuration and status information for mapping
VMs, datastores, and hosts to LUNs on HP storage arrays.
Supports provisioning on HP 3PAR StoreServ, HP StoreVirtual, HP
MSA G3, and HP EVA storage systems. Supported provisioning tasks
include creating, expanding, or deleting a datastore, and creating
or cloning a VM. Display view-only information for HP StoreOnce
Backup systems.
Update recommendation
Recommended
Supersedes
7.1.2
Product models
HP Insight Control for VMware vCenter Server
Devices supported
For device support information, see the following:
• HP Insight Control for VMware vCenter Server Installation Guide at http://www.hp.com/go/
icvcenter/docs.
• For Server support information, see the HP Insight Software Support Matrix at http://www.hp.com/
go/insightcontrol/docs.
• For Storage Module for vCenter storage array and array management software support, see the
HP SPOCK website: http://www.hp.com/storage/spock.
Operating systems
Supported VMware operating systems
• ESX/ESXi 4.1 (U2 and U3)
• ESXi 5.0 (initial release, U1, and U2)
• ESXi 5.1 (initial release and U1)
Description 3