HP OneView 1.0 User Guide

6. Add one connection to the FlatSAN B network. Enter the information shown in the following
table, and then click Add to add the connection and close the dialog box.
ValueAttribute
Fibre ChannelDevice type
FlatSAN BNetwork
2.5 (the default value)Requested bandwidth
Auto (the default value)FlexNIC
Not bootableBoot
The following illustration shows the Connections panel for the server profile after you add the
connections.
7. Scroll down to display the lower half of the Create server profile dialog box.
8. Configure the boot order for this server profile. Ensure that Manage boot order is selected.
Drag and drop the items so that they are in this order:
1. CD
2. HardDisk
3. Floppy
4. USB
5. PXE
Notice that the number next to each item is adjusted automatically when you use the
drag-and-drop method to change the order.
9. Edit the BIOS settings. For example:
a. Select Manage BIOS.
262 Step by step: Configuring an example data center using HP OneView