HP OneView 1.10 Support Matrix Abstract This document lists the hardware, firmware, and software requirements for installing and using HP OneView.
© Copyright 2013–2014, Hewlett-Packard Development Company, L.P. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. The information contained herein is subject to change without notice.
Contents 1 Appliance requirements...............................................................................5 1.1 Appliance VM and host requirements.....................................................................................5 1.1.1 Where to create the virtual machine................................................................................5 1.1.2 Planning for high availability..........................................................................................5 1.
.5.6 Finding documents on the HP Support Center website....................................................20 4.6 Submit documentation feedback.........................................................................................
1 Appliance requirements 1.1 Appliance VM and host requirements HP OneView is a virtual appliance running on the following supported hypervisor hosts. Table 1 Supported hypervisors and versions Hypervisor Version VMware ESXi • 5.0 • 5.0 update 1 • 5.0 update 2 • 5.0 update 3 • 5.1 • 5.1 update 1 • 5.1 update 2 • 5.5 • 5.
1.2 Firmware requirements This section describes the firmware requirements for devices you plan to manage with HP OneView. • To add a device to the appliance, the device must meet the minimum firmware requirements described in section “Minimum firmware requirements” (page 7). • To actively manage a device that you have added to the appliance, the device must meet the firmware management baselines. 1.2.1 HP Service Pack for ProLiant (SPP) This version of HP OneView contains SPP version 2014.06.
1.2.2 Minimum firmware requirements Ensure that the devices you plan to manage have the following minimum firmware versions before you add them to the appliance. Table 2 Minimum firmware requirements for management Device Firmware version HP Virtual Connect 3.15 HP BladeSystem Onboard Administrator 3.00 HP Integrated Lights-Out 4 1.01 HP Integrated Lights-Out 3 1.
1.
2 Supported hardware 2.1 HP ProLiant BL and WS server blades Table 3 HP ProLiant BL and WS server blades Model G7 Gen8 ✓ BL420c BL460c ✓ ✓ BL465c ✓ ✓ BL490c ✓ BL620c ✓ ✓ BL660c BL685c ✓ ✓ WS460c 2.2 HP ProLiant DL rack mount servers Table 4 HP ProLiant DL rack mount servers Model G7 Gen8 DL160 ✓ DL320e ✓ DL320e v2 ✓ DL360e ✓ DL360p ✓ DL380e ✓ DL380p ✓ DL380z ✓ DL385p ✓ DL560 ✓ DL580 ✓ 2.
HP ProLiant BL G71 Feature HP ProLiant BL and WS Gen8 HP ProLiant DL Gen82 Launch iLO remote console ✓ ✓ ✓ SSO (single sign-on) to iLO web interface ✓ ✓ ✓ Automatic firmware upgrade (iLO) to minimum supported version when added to the appliance ✓ ✓ ✓ Rack visualization and editing ✓ ✓ ✓ Automatic discovery of server hardware type ✓ ✓ ✓ BIOS settings ✓ ✓3 Firmware ✓ ✓ Server profile features Connections to networks ✓ ✓ Boot order ✓ ✓ Local storage4 SAN storage 1 2 ✓ ✓
2.7 Networking LOM and mezzanine cards If an adapter that is not fully supported exists in a server, the adapter is not actively managed by the appliance; this state is referred to as unmanaged support. The adapter might still be usable depending on the model and what it is connected to (for example, an interconnect module). The appliance reports the existence of the adapter on the Server Hardware or Server Hardware Types screens in the appliance UI. 2.7.
1 Unmanaged support means that the device can exist in the enclosure and function as-is, but it is not managed by HP OneView. 2.7.
For HP Virtual Connect 8Gb 20-port Fibre Channel and HP Virtual Connect 8Gb 24-port Fibre Channel modules • Interconnect modules are for Fabric attach only. • Interconnect firmware version must be at or higher than the firmware version listed in “Minimum firmware requirements” (page 7). • Interconnect modules cannot be placed in bays 1 or 2. For HP Virtual Connect FlexFabric–20/40 F8 modules • Interconnect module requires 10 fans in an enclosure.
2.9 FLB or Mezzanine card–VC module configurations HP OneView supports network connectivity through the following FLB (Flexible LOM for blades) or mezzanine card–HP Virtual Connect module configurations.
3 Configuration maximums 3.1 Allocated IDs Table 9 Allocated ID configuration maximums Resource MAC range WWN range Virtual SN (serial number) range Maximum 35,520 7,680 640 3.2 Appliance Table 10 Appliance configuration maximums Resource Maximum Firmware bundles 12 GB (approximately 3 bundles) Concurrent users 5 3.
3.4 Enclosures Table 12 Enclosure configuration maximums Resource Maximum Enclosures 40 Enclosure groups 40 Interconnects 240 3.5 Network sets Table 13 Network set configuration maximums Resource Total number of network sets Networks per network set Maximum 1,000 162 Connection types 1,064 Logical downlinks 320 Logical interconnect groups 40 Logical interconnects 40 Logical uplinks per logical interconnect 144 Total number of logical uplinks Interconnect types 5,760 7 3.
3.7 Power and facilities Table 15 Power and facility configuration maximums Resource Data centers Racks Maximum 10 640 PDDs (power delivery devices) 2,400 Unmanaged devices 10,000 iPDUs 2,560 iPDU components (load segments and outlets) 76,800 Branch circuits 2,560 Breaker panels 64 Power feeds 32 3.
4 Support and other resources The following topics provide information about HP Support as well as the other resources and documentation that are available to assist you in the use of HP OneView. 4.
See http://www.hp.com/go/insightlicense for more information. 4.4.2 Using your software technical support and update service Once registered, you receive a service contract in the mail containing the customer service phone number and your Service Agreement Identifier (SAID). You need the SAID when you phone for technical support. 4.4.3 Obtaining HP OneView software and firmware updates See http://www.hp.com/go/oneviewupdates to obtain HP OneView software updates and product-specific firmware bundles. 4.
• HP OneView Installation Guide • zip file of HP OneView REST API HTML help files • HP OneView User Guide • Technical white papers HP OneView help HP OneView websites • Primary website: http://www.hp.com/go/oneview To view help on the appliance, click to open the Help sidebar. Links in the sidebar open help in a new browser • Software updates: http://www.hp.
1. 2. 3. 4. 5. 6. Go to the HP Support Center website at http://www.hp.com/go/hpsc. Under Knowledge Base in the left navigation pane, select Manuals. Type a product name in the Find an HP product by search box (for example, Storage 3PAR or HP Virtual Connect) and click Go. If more than one product name is returned in the results, select the product you want. On the Manuals page for that product, select your Language.
