HP OneView Deployment and Management Guide 1.0

Technical white paper | HP OneView Deployment and Management Guide
16
2. Once on the Networks screen, click the +Create Network button on the far left.
3. In the new window, provide the Name, select Ethernet as the Type, provide the VLAN ID (which must be unique within
the HP OneView appliance), and bandwidth settings. Smart Link will automatically be selected by default. The Name is
not case-sensitive, can contain spaces and special characters. Selecting Private Network will mimic PVLAN behavior in
that all assigned Network Connections will all be in an Issolated network. The Purpose dropdown selection is reserved
for future functionality use.
Note
Virtual Connect Active/Active Networking is not supported in version 1.0.
4. Click the Create button to create the new Ethernet Network and close the Create Network dialog box. You can also
select the Create+ button to continue creating more Networks.
Creating FCoE SAN Fabrics
HP OneView supports single-hop FCoE Fabrics in the 1.0 release with either traditional Fibre Channel Fabric Attach, or Virtual
Connect FlatSAN with HP 3Par StoreServe Direct Attach. Please choose the appropriate following scenario to create either a
Fabric Attach or 3Par Direct Attach Fabric.