HP OneView Deployment and Management Guide 1.0

Technical white paper | HP OneView Deployment and Management Guide
22
automatically select the correct module.
Creating Uplink Sets
1. Click the Add uplink set button.
2. On this window, we will create an Ethernet Type Uplink set representing an Active/Standby configuration. Provide a
Name, select Ethernet as the Type.
3. Click the Add networks button to select the networks to add. By not selecting a Network or multiple Networks, they will
be Internal Ethernet Networks within the Logical Interconnect that is applied to each enclosure from the Logical
Interconnect Group. A search field is provided to quickly locate a specific Network or multiple Networks. After
searching you can either Left Click to select a single network or SHIFT/CTRL+Left Mouse Click to multi-select networks.
Once all of your networks are selected, click the Add button, or click the Add+ button to continue to add more networks