HP OneView Deployment and Management Guide 1.0

Technical white paper | HP OneView Deployment and Management Guide
5
Supported Interconnects
• HP Virtual Connect FlexFabric 10Gb/24-Port Module
• HP Virtual Connect Flex-10 10Gb Ethernet Module
• HP Virtual Connect Flex-10/10D Ethernet Module
Hardware Firmware Minimum Requirements
Table 3 shows the minimum firmware requirements needed to successfully import an enclosure. Firmware will be updated
via the appliance to the required versions later in this document.
Table 3. Minimum Firmware Requirements
Onboard Administrator
3.00 or newer
iLO4
1.01 or newer
iLO3
1.20 or newer
Virtual Connect
3.15 or newer
Table 4. Post Import Firmware Minimum Version
Onboard Administrator
4.01
iLO4
1.30
iLO3
1.61
Virtual Connect
4.10
Note
The Appliance Virtual Machine should not be deployed on a hypervisor within the same enclosure it will manage. Please use
an externally available hypervisor host.
Table 5 shows the HP OneView 1.0 Coniguration Maximums.
Table 5. Supported Maximums
Total Servers
640
Servers per Enclosure
16
Total Enclosures
40
Total Interconnects
160
Total Enclosure Groups
40
Total Server Profiles
740
Assigned Server Profiles
640
Total Unassigned Server Profiles
100