HP OneView Deployment and Management Guide 1.0

Technical white paper | HP OneView Deployment and Management Guide
50
A. (Optional) If you wish to configure FC Boot From SAN (BFS), change the Boot setting from Not Bootable to either
Primary or Secondary. You will need to provide the Target WWN and Host LUN ID in the respective fields.
6. Modify the Boot Order if necessary.
7. Modify the following, or customize your own BIOS Settings
A. Add a Custom Post Message under the Server Asset Text section. E.g. “HP ONEVIEW ROCKS!”
B. Change the HP Power Regulator setting to HP Static High Performance under the Power Management Options
section.
Notice when you change the HP Power Regulator from the default to HP Static High Performance, the HP Power
Profile, Intel QPI Link Power Management, Minimum Processor Idle Power Core State, and other related BIOS
settings change.