HP OneView Deployment and Management Guide 1.0

Technical white paper | HP OneView Deployment and Management Guide
93
3. The information in the General section of the details pane allows you to see the rack automatically created to house
the enclosure.
Section M15: Adding Rack Servers (DL’s) to Racks without Location Discovery Services
If LDS is not present, racks are not automatically created for DL servers. DL servers may be added to racks previously
created via enclosure discovery or racks may be created manually and have servers added to them. For either option, begin
by navigating to the Racks screen.
1. To go to the Racks screen, select Racks in the main menu.
2. On the Racks screen, to create a rack either select Add Rack button in the left panel or Add from the Actions pull-down
on the right of the screen.
OR
3. Once on the Add Rack screen, the screen details is segmented into the General and Layout sections. On the General
pane, enter the requested information for the rack hardware.
4. The Layout panel consists of a visual representation of the rack and its slots, a list of available devices and a search box
to find the desire systems and enclosures. From this panel, you can add, remove, and rearrange devices within the