HP OneView Deployment and Management Guide 1.0

Technical white paper | HP OneView Deployment and Management Guide
24
5. Click the Add ports button to add uplink ports.
6. Select at least one port from each Ethernet Module. To quickly add multiple Uplink Ports, first search for a common
port (eg. X5), select them, click the Add+ button, then change the search to another port (eg. X6) and click the Add
button.
7. After you have added the Uplink Ports to your Uplink Set, click the Create button. If you wish to define additional Uplink
Sets, click the Create+ button.
8. Continue to the next section to create Fibre Channel Uplink Sets. Othwersie, click the General dropdown list and select
Switch Settings, or scroll the window to the bottom to modify Ethernet Module parameters like IGMP Snooping, Loop
Protection, Fast MAC Cache Failover, SNMP settings, etc.