HP OneView Deployment and Management Guide 1.05

Technical white paper | HP OneView Deployment and Management Guide
11
Figure 8. Configure Appliance Networking
After clicking OK, the appliance will configure those parameters. If you selected Static for the IP Address Assignment, you
should be redirected to the new IP address. Please accept the certificate security warnings during the redirection, as a new
SSL certificate is generated from the FQDN.
Caution
If the Management IP Address needs to be changed after completing the First Time Setup, change it prior to adding
enclosures. Otherwise enclosures under management will lose the connection to the management appliance. It is advised
to re-deploy the appliance, and re-add the enclosure(s).