HP OneView Deployment and Management Guide 1.05

Technical white paper | HP OneView Deployment and Management Guide
29
Enclosure Import process will also discover any device in the enclosure’s Device Bays, and attempt to configure the
supported iLO ’s for management (SNMP, NTP, HP SIM SSO Certificate, create a special user account _HPOneViewAdmin) and
license the iLO ‘s and servers based on the License Intent setting in the Add Enclosure screen.
Table 9. Enclosure Import Checklist
Task
Completed? (Y|N)
Documented Onboard Administrator IP Address or FQDN
Documented Onboard Administrator administrator
credentials
Configured Onboard Administrator settings (EBIPA, Power
Redundancy, etc.)
Warning
Release 1.0 and 1.05 do not support importing an existing Virtual Connect Domain. If one is present, it will be deleted if you
force the addition of the enclosure into the appliance.
1. Navigate to Enclosures in the console.
2. Click the Add Enclosure button.
3. Import your first enclosure, select the Enclosure Group, define the license policy, and specify the Firmware Baseline to
apply. Selecting the Add or Add+ button, the enclosure will be discovered, and the OA firmware will be updated to the