HP OneView Deployment and Management Guide 1.05

Technical white paper | HP OneView Deployment and Management Guide
78
2. Once on the Enclosure screen, select the +Add enclosure button.
3. Provide the IP address or FQDN of the Enclosure, with an Administrator account, select an Enclosure Group, and specify
the Firmware Baseline to apply. Selecting the Add or Add+ button, the enclosure will be discovered, and the OA
firmware will be updated to the version within the SPP.
4. During the Add Enclosure process, the Onboard Administrator firmware will be updated and the appliance will report
the Onboard Administrator cannot be reached. This is a normal message during the OA Firmware Update process. You
can see this error condition by viewing the Alerts of the Enclosure. This alert will be automatically cleared after the
Enclosure has been added.