HP OneView REST API Reference

interconnects
interconnects.html[10/17/2013 10:35:37 AM]
type: description: Identifies the resource type. This field must be set to 'snmp-configuration'.
type: string
description: description: Brief description of the resource
type: string
category: description: Resource category used for authorizations and resource type groupings
type: string
igmpIdleTimeoutInterval: description: IGMP idle timeout interval
type: integer
enableFastMacCacheFailover: description: Indicates whether Fast Mac Cache Failover is enabled on this interconnect
type: boolean
enableIgmpSnooping: description: Indicates whether IGMP snooping is enabled on this interconnect
type: boolean
state: description: The current resource state of the Interconnect. The supported values are enumerated in the table below.
type: string
enum: Adding
AddedWithErrors
Imported
Removed
Configuring
Configured
ConfigError
Removing
RemoveFailed
Unmanaged
Absent
Inventory
Unsupported
Maintenance
type: description: Identifies the resource type. This field must be set to 'interconnect'.
type: string
enclosureUri: description: Enclosure URI which contains the interconnect
type: string
status: description: Overall health status of the resource. The following are the valid values for the status of the
resource:Unknown - should be avoided, but there may be rare occasions where status is Unknown; OK -
indicates normal/informational behavior; Disabled - indicates that a resource is not operational; Warning -
needs attention soon; Critical - needs immediate attention.
type: string
description: description: Brief description of the resource
type: string
enableNetworkLoopProtection: description: Indicates whether network loop protection is enabled on this interconnect
type: boolean
productName: description: Product name of the interconnect
type: string
logicalInterconnectUri: description: Logical interconnect URI
type: string
subPortCount: description: Number of sub-ports on the interconnect
type: integer
networkLoopProtectionInterval: description: Network loop protection interval on this interconnect. If value is greater than '0', loop protection is enabled.
type: integer
interconnectIP: description: Interconnect IP address
type: string
partNumber: description: Interconnect part number