HP OneView REST API Reference

datacenters
datacenters.html[10/17/2013 10:35:40 AM]
coolingCapacity: description: Maximum cooling capacity for the datacenter in watts.
minimum: 0
type: integer
modified: description: Date and time when the resource was last modified
format: YYYY-MM-DDThh:mm:ss.sssZ
type: string
pattern: [1-2][0-9][0-9][0-9]-([0-1][0-9])-[0-3][0-9]T[0-2][0-9]:[0-5][0-9]:[0-5][0-9](.
[0-9][0-9][0-9])?Z
defaultPowerLineVoltage: description: The default power line voltage used for watts/amps translation when
voltage is not otherwise available (for example when summarizing
power at the rack or data center level).
default: 220
minimum: 0
type: integer
required: true
type: description: Identifies the resource type. This field must be set to 'Datacenter'.
type: string
coolingMultiplier: description: The ratio of cooling costs to power costs of the IT equipment. This
value represents the relative cost of cooling the system compared to
the cost of powering the system. The default value of 1.5 indicates
that it costs 1.5 as much to cool the system as it does to power the
system. This value is multiplied by the kilowatt-hours used by the
system to obtain the cooling kilowatt-hours that are used in the
analysis section of graphs that display power consumption.
default: 1.5
required: true
type: number
costPerKilowattHour: description: The energy cost per kilowatt-hour.
type: number
uuid: description: The universally unique identifier of the resource.
readonly: true
type: string
VisualContent
description: Describes the physical location and properties of a rack necessary for visualizing it within the
data center. It returns an aggregated, read-only summary of data from the data center, rack,
and devices in the rack.