HP OneView REST API Reference

power-devices
power-devices.html[10/17/2013 10:35:43 AM]
readonly: true
minimum: 0
state: description: The current state of the resource. Valid values include
Adding, AddError, Configured, CredentialError, Refreshing,
RefreshError, Removing, RemoveError, and Unmanaged.
type: string
readonly: true
deviceType: description: The type that this power delivery device represents.
default: BranchCircuit
enum: HPIpduCore
HPIpduLoadSegment
HPIpduOutletBar
HPIpduOutlet
HPIpduAcModule
PowerFeed
BreakerPanel
BranchCircuit
RackPdu
RackUps
PowerStrip
LoadSegment
Outlet
type: string
required: true
ratedCapacity: description: The rated capacity of this power delivery device in Amps.
This may come from the inherent capacity of the device, or
by an explicit circuit breaker rating
minimum: 0
type: integer
required: true
type: description: Identifies the resource type. This field must be set to
'PowerDeliveryDevice'.
type: string
status: description: Overall health status of the resource. The following are the
valid values for the status of the resource:Unknown -
should be avoided, but there may be rare occasions where
status is Unknown; OK - indicates normal/informational
behavior; Disabled - indicates that a resource is not
operational; Warning - needs attention soon; Critical -
needs immediate attention.
type: string
phaseType: description: The phase type of this power device. This value is used in
conjunction with the capacity and line voltage to determine
the total output power for this device in watts.
default: Unknown