HP OneView REST API Reference

server-profiles
server-profiles.html[10/17/2013 10:35:14 AM]
PXE and FCoE connections are treated
separately; an Ethernet connection and an
FCoE connection can both be marked as
Primary. The 'order' attribute controls
ordering among the different device types.
type: string
targets: description: Defines the boot target that the server
will attempt to boot. Only one boot
target is currently supported. The boot
target can only be specified if the
bootPriority is specified, and only for
Fibre Channel connections. If omitted,
the server will attempt to boot using the
server adapter configuration.
minItems: 0
Items
arrayWwpn: description: The wwpn of the target
device that provides
access to the Boot
Volume. This value must
contain 16 HEX digits.
required: true
type: string
searchable: true
lun: description: The LUN of the Boot
Volume presented by the
target device. This value
can be either 1 to 3
decimal digits in the
range 0 to 255, or 13 to
16 hex digits with no
other characters
required: true
type: string
maxItems: 1
type: array
wwnn: description: The node WWN address that is currently programmed on
the FlexNic and deployed to the FlexFabric switch. The
value can be a virtual WWNN, user defined WWNN or
physical WWNN read from the device. It cannot be modified
after the connection is created.
type: string
searchable: true
mac: description: The MAC address that is currently programmed on the
FlexNic and deployed to the Ethernet switch. The value can
be a virtual MAC, user defined MAC or physical MAC read
from the device. It cannot be modified after the connection
is created.
type: string
searchable: true
wwpn:
description: The port WWN address that is currently programmed on the