HP OneView 1.05 User Guide

Enclosure 2
DescriptionAttribute
Enclosure-1904Name
172.18.1.13Primary Onboard Administrator IP
address
172.18.1.14Secondary Onboard Administrator IP
address
User name OAAdmin
Password S&leP@ssw0rd
Onboard Administrator credentials
User name iLOAdmin
Password S&leP@ssw0rd
iLO administrator credentials (all
servers):
Rack 173, U11 through U20Physical location
I/O bay numberInterconnect hardware
1, 2HP Virtual Connect FlexFabric
10Gb/24-Port Module
Server bay numbersServer hardware models
1, 2HP ProLiant BL660c Gen8
3, 4, 5, 6, 7, 8, 11, 12, 13, 14, 15, 16HP ProLiant BL460c Gen8
9, 10None (bay is empty)
HP Virtual Connect FlexFabric 10Gb/24-Port Module port configurations
Permitted configurationsPorts
Either Fibre Channel or 10Gb EthernetX1, X2, X3, X4
Either 1GB or 10Gb EthernetX5, X6
Either internal stacking link or 1GB or 10Gb Ethernet. If a port is used for an
internal stacking link, do not use it for an external Ethernet connection. For this
data center, use X7 for the internal stacking link.
X7, X8
A.2.2 Data center networks
All data center switch ports that connect to the VC (Virtual Connect) interconnect modules are
configured as described in “Data center switch port requirements” (page 139).
A.2.2.1 Fibre Channel networks
Fibre Channel networks for the SAN fabrics
The sample data center has two Fibre Channel SAN switches. To see a graphical representation
of the configuration, see Figure 17 (page 255).
The names for the Fabric attach Fibre Channel networks are:
• SAN A
• SAN B
A.2 Information about the sample data center 253