HP OneView 1.05 User Guide

a. Add two connections to the esxi mgmt 1131 network. When you finish entering the
information for a connection, click Add + to add this connection and reopen the dialog
box so that you can add the connections in the next step.
ValueAttribute
EthernetDevice type
esxi mgmt 1131Network
2.5 (the default value)Requested bandwidth
Auto (the default value)FlexNIC
For the first connection, select Primary. For the second connection, select
Secondary.
Boot
b. Add two connections to the esxi vmotion 1132 network. Because the configuration
is the same for both connections, you can enter the information, and then click Add +
twice to add both connections and reopen the dialog box for the next step.
ValueAttribute
EthernetDevice type
esxi vmotion 1132Network
2.5 (the default value)Requested bandwidth
Auto (the default value)FlexNIC
For both connections, select Not bootableBoot
c. Add two connections to the esxi vmotion 1132 network. Because the configuration
is the same for both connections, you can enter the information, and then click Add +
twice to add both connections and reopen the dialog box for the next step.
ValueAttribute
EthernetDevice type
esxi vmotion 1132Network
2.5 (the default value)Requested bandwidth
Auto (the default value)FlexNIC
For both connections, select Not bootableBoot
d. Add two connections to the prod networks network set. Because the configuration is
the same for both connections, you can enter the information, and then click Add + twice
to add both connections and reopen the dialog box for the next step.
ValueAttribute
EthernetDevice type
prod networksNetwork
2.5 (the default value)Requested bandwidth
Auto (the default value)FlexNIC
For both connections, select Not bootableBoot
272 Step by step: Configuring an example data center using HP OneView