HP OneView 1.05 User Guide
3. Click Add to add the enclosure.
The appliance discovers the interconnects in the enclosure, creates a logical interconnect
group, and opens the Edit DirectAttachGroup logical interconnect group screen (see the
following illustration).
4. Add the uplink sets for the Flat SAN networks:
a. Click Add uplink set.
The Add uplink set screen opens.
b. Configure the uplink set for the FlatSAN A Fibre Channel network.
• For Name, enter FlatSAN A.
• For Type, select Fibre Channel.
When you select Fibre Channel, the screen expands to include additional configuration
items.
• For Network, select FlatSAN A.
c. Configure the uplink ports:
i. For Interconnect under Uplink Ports, select Interconnect: 1.
The ports that can be used for Fibre Channel networks are displayed.
ii. Select ports X3 and X4.
d. Click Create + to add the FlatSAN A uplink set to the logical interconnect group and
reopen the Add uplink set screen.
5. Add the uplink set for the FlatSAN B Fibre Channel network:
a. For Name, enter FlatSAN B.
b. For Type, select Fibre Channel.
278 Step by step: Configuring an example data center using HP OneView