HP OneView Deployment and Management Guide 1.05

Technical white paper | HP OneView Deployment and Management Guide
75
Section M2: Add New Networks and Edit Server Profile
In this section you will add Networks to HP OneView and modify an existing Logical Interconnect Group. You will then add
the new Network or Networks to an existing Network Set or add a new Network Connection to an existing Server Profile.
Add Network(s)
1. Add a new Ethernet Network into the appliance. By adding a new Network, HP OneView will configure all Logical
Interconnects within the HP OneView appliance, but not configure the Uplink Set(s) or Logical Interconnect Group(s).
By looking at the Logical Interconnecet, you will notice the network(s) you added is a Local network.