HP OneView Deployment and Management Guide 1.05

Technical white paper | HP OneView Deployment and Management Guide
80
3. In the new window, provide the Name, select Ethernet as the Type, provide the VLAN ID, and bandwidth settings. Smart
Link will automatically be selected by default. Select Private Network if needed.
4. Click the Create button to create the new Ethernet Network and close the Create Network dialog box. You can also
select the Create+ button to continue creating more Networks.
Note
HP OneView 1.05 supports Virtual Connect Active/Active Network Designs.
5. After the network has been created, it will be provisioned to all managed Virtual Connect Ethernet Interconnects. The
new network(s) is an “Internal” network, until it is assigned to an Uplink Set either at the Logical Interconnect Group or
Logical Interconnect.