HP OneView 1.05 Release Notes

1.4.2 Bandwidth setting enforcement supported on FlexNICs in HP ProLiant BL465c
G7 and BL685c G7 servers
The Optimized Bandwidth feature is correctly disabled on the following adapters:
• HP NC551i Dual Port FlexFabric 10Gb Converged Network Adapter (HP ProLiant BL465c
G7 and HP ProLiant BL685 G7 LOM)
• HP NC551m Dual Port FlexFabric 10Gb Converged Network Adapter
• HP NC550m 10Gb 2-port PCIe x8 Flex-10 Ethernet Adapter
Connections on these adapters have equal Allocated and Maximum bandwidth settings, ensuring
that the connections will receive their allocated share of the bandwidth.
1.5 New appliance installation instructions
To install HP OneView version 1.05 on a new appliance, follow the instructions in the HP OneView
1.0 Installation Guide, which is available at the HP OneView Information Library (http://
www.hp.com/go/oneview/docs).
1.5.1 Validating the authenticity and integrity of the .ova download
When you download the HP OneView appliance file from the HP Software Depot website at
https://www.software.hp.com, you can trust that the virtual appliance image is from HP because
the site is cryptographically secured by HP.
If the person who is installing the virtual appliance is not the person who downloaded the virtual
appliance (that is, a break has occurred in the chain of trust), the virtual appliance file has also
been digitally signed.
Use the freely available GPG tools to validate the authenticity and integrity of the file. For example:
gpg --verify HP_OneView_1.05_Z7550-01284.ova.sig
HP_OneView_1.05_Z7550-01283.ova
NOTE: This digital signature verification step is not required for update installations. The update
installation file (the *.bin file) is already digitally signed, and the update process automatically
validates the digital signature.
See the following web page for detailed verification instructions: http://www.hp.com/go/codeverify
1.6 Upgrade paths
You can apply the HP OneView version 1.05 update to an HP OneView version 1.0 or 1.01
appliance.
The update procedure requires a reboot of the appliance and the entire procedure, including the
reboot, takes approximately 28 minutes.
1.7 Prerequisites for updating an HP OneView version 1.0 or 1.01
appliance
These prerequisites apply when you update an HP OneView version 1.0 or 1.01 appliance to HP
OneView version 1.05:
• You must be logged in to the appliance as a user with Infrastructure administrator privileges.
• No other users are logged in to the appliance and no one logs in during the update.
6 Release description and installation instructions