HP OneView Deployment and Management Guide 1.05

Technical white paper | HP OneView Deployment and Management Guide
10
Figure 7. Change Administrator Password
After providing the new Administrators password, you will be prompted for Appliance Networking configuration. You will
need the following:
• Appliance Hostname (e.g. hponeview.example.com)
– If you specify an FQDN, verify valid A and PTR records exist. The appliance will perform an nslookup of the FQDN and IP
address and report an appliance warning if neither are available.
• IPv4 Address (DHCP or Static can be used).
– DHCP is only supported when Static Reservations are used.
• Default Gateway
• (OPTIONAL) DNS Servers
• (OPTIONAL) IPv6
• SNTP