HP OneView Deployment and Management Guide 1.05

Technical white paper | HP OneView Deployment and Management Guide

2. Once on the Networks screen, click the +Create Network button on the far left.

3. In the new window, provide the Name, select Ethernet as the Type, provide the VLAN ID, and bandwidth settings. Smart

Link will automatically be selected by default. The Name is not case-sensitive, can contain spaces and special

characters. Selecting Private Network will mimic PVLAN behavior in that all assigned Network Connections will all be in

an isolated network. The Purpose dropdown selection is used by the HP Insight Control for vCenter Plugin

Note

Virtual Connect Active/Active Networking is now supported in version 1.05.

4. Click the Create button to create the new Ethernet Network and close the Create Network dialog box. You can also

select the Create+ button to continue creating more Networks – e.g. Create the B-Side Ethernet Network.

Creating FCoE SAN Fabrics

HP OneView supports single-hop FCoE Fabrics in the 1.0 /1.05 release with either traditional Fibre Channel Fabric Attach, or

Virtual Connect FlatSAN with HP 3Par StoreServe Direct Attach. Please choose the appropriate following scenario to create

either a Fabric Attach or 3Par Direct Attach Fabric.

http://h30507.www3.hp.com/t5/Converged-Infrastructure/Finally-an-integrated-tool-based-on-how-I-work/ba-p/154413#.Ux1MmyyUPX4