HP OneView Deployment and Management Guide 1.05

Technical white paper | HP OneView Deployment and Management Guide

2. In the Logical Interconnects view, validate the [ENC-Name]-LI Logical Interconnect is selected, then the Actions menu

select Update Firmware.

3. On the Update Firmware on [ENC-NAME]-LI window, select the Firmware Baseline, and select Update Firmware (stage +

activate) action. The other two options are for staging firmware to initiate a manual activation of the Virtual Connect

firmware. The second option Stage firmware for later activation is used to deploy and stage the firmware for later

manual activation by the admin. If firmware has been previously staged, the final option would become active.

Note

HP OneView does not offer the ability to modify Activation order, and each module is Activated independently and at the

same time, which will cause a network outage. To control potential outages, consider staging and manual activation of

Virtual Connect firmware.