HP OneView Deployment and Management Guide 1.05

Technical white paper | HP OneView Deployment and Management Guide

Network Connections to the Server Profile.

Note

HP OneView 1.05 support Virtual Connect Active/Active Network Designs.

Note

You can specify which FlexNIC to assign the Network Connection to, or leave it at the default of Auto. Auto will apply

the same Network Connection to Adapter mapping Virtual Connect does today. Do know that you cannot create a

FlexNIC B, C or D without first creating FlexNIC A.

Note

The Use user-specified IDs is for those customers that wish to provide their own MAC or WWN address for that

connection.

5. (Optional) Adding Fibre Channel Networks is a similar operation as an Ethernet Deviec Type. FlexNIC B is reserved for FC

Connections when FC Connection Types are added to the Server Profile. When choosing the FlexNIC, you can leave the

default Auto. You can force the FlexNIC assignment, but the list will be filtered based on the connection location to the

Interconnect Bay the FC Network is assigned to.