HP OneView Deployment and Management Guide 1.05

Technical white paper | HP OneView Deployment and Management Guide
62
Adding 3
rd
Party PDU’s or non-HP iPDU’s
1. If an iPDU is not being used, create one or more Rack PDUs to represent power capacity in the rack. On the Power
Delivery Device screen, select + Add power delivery device.
2. On the Add Power Delivery Device screen, select Rack PDU and specify the properties that will represent your PDU and
the power capacity it provides.
3. If you know the hardware the PDU will be providing power to, it can be added by selecting the Add Connections link on
the Add Power Delivery Device screen above. Once there, available hardware can be selected.
4. Next, navigate to Racks from the Top Level Menu.
5. Edit the rack layout associated with the newly created PDU to set its position properly by dragging components around
within the rack or from the Device Selection list.
Adding Unmanaged Devices
Unmanaged devices can be created for any devices that cannot be discovered by HP OneView but consume power or slots in
the rack.