HP OneView Deployment and Management Guide 1.05

Technical white paper | HP OneView Deployment and Management Guide
77
4. Navigate to Network Sets and add the new Network to an existing Network Set.
Information
Adding a Network to a Network Set does not require a Server to be powered off, and will deploy the updated Network
Set configuration automatically.
5. Examine a Server Profile that contains a Network Connection assigned to the Network Set.
Edit Server Profile
Once a profile has been applied, you can edit the profile to make changes, and fix issues that may have been encountered.
Introduced in the HP OneView 1.05 release, you can edit existing Network Connections by modifying existing assigned
Network and/or Bandwidth without needing to first Power Off the server. Other Server Profile edits will require the Server
Profile to be Powered Off.
1. Verify the Server is powered off, if your appliance is not at 1.05 or newer.
2. Select the Actions menu, then select Edit.
3. Make the necessary changes to the server profile (i.e. Bandwidth adjustment, add a Network Connection, etc.)
4. Click the OK button to save the changes to the Server Profile.
5. Notice the server does not have its firmware reapplied, and only those changes are applied.
Section M3: Adding a New Enclosure
1. Select the main menu option in the upper left, and choose Enclosures.