FW 05.01.00 and SW 07.01.00 HP StorageWorks SNMP Reference for Directors and Edge Switches Reference Guide (AA-RQ7BD-TE, June 2003)

SNMP Support
103SNMP Reference for Directors and Edge Switches
FcConnUnitPo
rtStatus
INTEGER See “Port State
Descriptions” on page 143.
R The current overall protocol
status for the port. The
warning value (4) means that
the port needs attention; the
notParticipating value (6)
means that protocol is not
being processed; the
initializing value (7) means
that the port is in the process
of coming into service; the
bypassed value (8) means
that the port has been
manually or automatically
isolated from the loop or
fabric; the other values are
essentially self-explanatory.
Any value for this object may
co-exist with any value for the
fcConnUnitPortState object.
The values are defined as
follows: unknown (1), unused
(2), ok (3), warning (4),
failure (5), notParticipating
(6), initializing (7), bypassed
(8).
FcConnUnitPo
rtTransmitterTy
pe
INTEGER This is mapped from the
port technology as follows:
not present and serial
indicate unknown(1),
optical sw1g and optical
sw2g indicate
shortwave(4). Optical lw1g
and optical lw2g indicate
longwave(5), copper db9
and copper amp indicate
copper(6). (Get the value
from port technology
owned by FPM).
R The technology of the port
transceiver. The values are
defined as follows: unknown
(1), other (2), unused (3),
shortwave (4) longwave (5),
copper (6), and scsi (7),
longwaveNoOFC (8),
shortwaveNoOFC (9),
longwaveLED (10).