FW 05.01.00 and SW 07.01.00 HP StorageWorks SNMP Reference for Directors and Edge Switches Reference Guide (AA-RQ7BD-TE, June 2003)

SNMP Support
107SNMP Reference for Directors and Edge Switches
FcConnUnitPo
rtControl
(continued)
(continued from previous cell)
OnlineConnUnitPort (7): If
the addressed connectivity
unit allows this operation to
be performed on this port,
the addressed port performs
a vendor-specific ‘online’
operation. Examples of these
operations are: enabling a
port’s transceiver, the Link
Failure protocol, request
(participating) command to
the Loop Port state machine,
or addition of the port from
an arbitrated loop by a hub.
NOTE: Each implementation
may chose not to support
SNMP Set operations for any
or all of these values. For Sets
specifying varbinds for
instances of this object and
values not supported by a
given implementation, the
agent will return the SNMP
WrongValue PDU error code.
FcConnUnitPo
rtName
SnmpAd
minString
Port Name R/W A string describing the
addressed port.
FcConnUnitPo
rtPhysicalNum
ber
Unsigned
32
Physical port number from
0 to Maximum port number
– 1
R This is the internal port
number this port is known by.
In many implementations, this
should be the same as
fcConnUnitPortIndex. Some
implementations may have
an internal port
representation not
compatible with the rules for
table indexes. In that case,
provide the internal
representation of this port in
this object. This value may
also be used in the
fcConnUnitLinkPortNumberX
or
fcConnUnitLinkPortNumberY
objects of the
fcConnUnitLinkTable.