FW 05.01.00 and SW 07.01.00 HP StorageWorks SNMP Reference for Directors and Edge Switches Reference Guide (AA-RQ7BD-TE, June 2003)

SNMP Support
117SNMP Reference for Directors and Edge Switches
FcConnUnitPo
rtStatCountRx
Objects
Counter6
4
stRxFrames (64-bit counter) R The number of
frames/packets/Ios/etc
that have been received by
this port. Note: A Fibre
Channel frame starts with
SOF and ends with EOF. FC
loop devices should not
count frames passed
through. This value
represents the sum total for
all other Rx objects.
FcConnUnitPo
rtStatCountTx
Elements
Counter6
4
stTxOctets (64-bit counter) R The number of octets or
bytes that have been
transmitted by this port.
One second periodic
polling of the port. This
value is saved and
compared with the next
polled value to compute net
throughput. Note, for Fibre
Channel, ordered sets are
not included in the count.
FcConnUnitPo
rtStatCountRx
Elements
Counter6
4
stRxOctets (64-bit counter) R The number of octets or
bytes that have been
received by this port. One
second periodic polling of
the port. This value is saved
and compared with the next
polled value to compute net
throughput. Note, for Fibre
Channel, ordered sets are
not included in the count.
FcConnUnitPo
rtStatCountBB
CreditZero
Counter6
4
Not supported R Count of transitions in/out
of Bbcredit zero state. The
other side is not providing
any credit. Note, this is a
Fibre Channel stat only.
FcConnUnitPo
rtStatCountInp
utBuffersFull
Counter6
4
Not supported R Count of occurrences when
all input buffers of a port
were full and outbound
buffer-to-buffer credit
transitioned to zero. There
is no credit to provide to
other side. Note, this is a
Fibre Channel stat only.