FW 05.01.00 and SW 07.01.00 HP StorageWorks SNMP Reference for Directors and Edge Switches Reference Guide (AA-RQ7BD-TE, June 2003)

SNMP Support
119SNMP Reference for Directors and Edge Switches
FcConnUnitPo
rtStatCountCla
ss1RxFrames
Counter6
4
Not supported R Count of Class 1 Frames
received at this port. Note,
this is a Fibre Channel only
stat.
FcConnUnitPo
rtStatCountCla
ss1TxFrames
Counter6
4
Not supported R Count of Class 1 Frames
transmitted out this port.
Note, this is a Fibre
Channel only stat.
FcConnUnitPo
rtStatCountCla
ss1FBSYFrame
s
Counter6
4
Not supported R Count of times that FBSY
was returned to this port as
a result of a Class 1 Frame
that could not be delivered
to the other end of the link.
This occurs if either the
Fabric or the destination
port is temporarily busy.
FBSY can only occur on
SOFc1 frames (the frames
that establish a connection).
Note, this is a Fibre
Channel only stat.
FcConnUnitPo
rtStatCountCla
ss1PBSYFrame
s
Counter6
4
Not supported R Count of times that PBSY
was returned to this port as
a result of a Class 1 Frame
that could not be delivered
to the other end of the link.
This occurs if the destination
N_Port is temporarily busy.
PBSY can only occur on
SOFc1 frames (the frames
that establish a connection).
Note, this is a Fibre
Channel only stat.
FcConnUnitPo
rtStatCountCla
ss1FRJTFrame
s
Counter6
4
Not supported R Count of times that FRJT
was returned to this port as
a result of a Class 1 Frame
that was rejected by the
fabric. Note, this is a Fibre
Channel only stat.
FcConnUnitPo
rtStatCountCla
ss1PRJTFrame
s
Counter6
4
Not supported R Count of times that FRJT
was returned to this port as
a result of a Class 1 Frame
that was rejected at the
destination N_Port. Note,
this is a Fibre Channel only
stat.