FW 05.01.00 and SW 07.01.00 HP StorageWorks SNMP Reference for Directors and Edge Switches Reference Guide (AA-RQ7BD-TE, June 2003)

SNMP Support
120 SNMP Reference for Directors and Edge Switches
FcConnUnitPo
rtStatCountCla
ss2RxFrames
Counter6
4
stC2FramesIn (64-bit
counter)
RCount of Class 2 Frames
received at this port. Note,
this is a Fibre Channel only
stat.
FcConnUnitPo
rtStatCountCla
ss2TxFrames
Counter6
4
stC2FramesOut (64-bit
counter)
RCount of Class 2 Frames
transmitted out this port.
Note, this is a Fibre
Channel only stat.
FcConnUnitPo
rtStatCountCla
ss2FBSYFrame
s
Counter6
4
stC2FabricBusy (Only
supports low 32-bits of
counter, high 32-bits are set to
zero)
RCount of times that FBSY
was returned to this port as
a result of a Class 2 Frame
that could not be delivered
to the other end of the link.
This occurs if either the
Fabric or the destination
port is temporarily busy.
FBSY can only occur on
SOFc1 frames (the frames
that establish a connection).
Note, this is a Fibre
Channel only stat.
FcConnUnitPo
rtStatCountCla
ss2PBSYFrame
s
Counter6
4
Not supported R Count of times that PBSY
was returned to this port as
a result of a Class 2 Frame
that could not be delivered
to the other end of the link.
This occurs if the destination
N_Port is temporarily busy.
PBSY can only occur on
SOFc1 frames (the frames
that establish a connection).
Note, this is a Fibre
Channel only stat.
FcConnUnitPo
rtStatCountCla
ss2FRJTFrame
s
Counter6
4
stC2FabricReject (Only
supports low 32-bits of
counter, high 32-bits are set to
zero)
RCount of times that FRJT
was returned to this port as
a result of a Class 2 Frame
that was rejected by the
fabric. Note, this is a Fibre
Channel only stat.
FcConnUnitPo
rtStatCountCla
ss2PRJTFrame
s
Counter6
4
Not supported R Count of times that FRJT
was returned to this port as
a result of a Class 2 Frame
that was rejected at the
destination N_Port. Note,
this is a Fibre Channel only
stat.