FW 05.01.00 and SW 07.01.00 HP StorageWorks SNMP Reference for Directors and Edge Switches Reference Guide (AA-RQ7BD-TE, June 2003)

SNMP Support
121SNMP Reference for Directors and Edge Switches
FcConnUnitPo
rtStatCountCla
ss3RxFrames
Counter6
4
stC3FramesIn (64-bit
counter)
RCount of Class 3 Frames
received at this port. Note,
this is a Fibre Channel only
stat.
FcConnUnitPo
rtStatCountCla
ss3TxFrames
Counter6
4
stC3FramesOut (64-bit
counter)
RCount of Class 3 Frames
transmitted out this port.
Note, this is a Fibre
Channel only stat.
FcConnUnitPo
rtStatCountCla
ss3Discards
Counter6
4
stC3Discards (64-bit
counter)
RCount of Class 3 Frames
that were discarded upon
reception at this port. There
is no FBSY or FRJT
generated for Class 3
Frames. They are simply
discarded if they cannot be
delivered. Note, this is a
Fibre Channel only stat.
FcConnUnitPo
rtStatCountRx
MulticastObje
cts
Counter6
4
Not supported R Count of Multicast Frames
or Packets received at this
port.
FcConnUnitPo
rtStatCountTx
MulticastObje
cts
Counter6
4
Not supported R Count of Multicast Frames
or Packets transmitted out
this port.
FcConnUnitPo
rtStatCountRx
BroadcastObj
ects
Counter6
4
Not supported R Count of Broadcast Frames
or Packets received at this
port.
FcConnUnitPo
rtStatCountTx
BroadcastObj
ects
Counter6
4
Not supported R Count of Broadcast Frames
or Packets transmitted out
this port. On a Fibre
Channel loop, count only
OPNr frames generated.
FcConnUnitPo
rtStatCountRxL
inkResets
Counter6
4
StLinkResetsIn (Only
supports low 32-bits of
counter, high 32-bits are set to
zero)
R Count of Link resets. This is
the number of LRs received.
Note, this is a Fibre
Channel only stat.
FcConnUnitPo
rtStatCountTxL
inkResets
Counter6
4
stLinkResetsOut (Only
supports low 32-bits of
counter, high 32-bits are set to
zero)
R Count of Link resets. This is
the number LRs transmitted.
Note, this is a Fibre
Channel only stat.