FW 05.01.00 and SW 07.01.00 HP StorageWorks SNMP Reference for Directors and Edge Switches Reference Guide (AA-RQ7BD-TE, June 2003)

SNMP Support
122 SNMP Reference for Directors and Edge Switches
FcConnUnitPo
rtStatCountNu
mberLinkReset
s
Counter6
4
StLinkResetsIn +
stLinkResetsOut (Only supports
low 32-bits of counter, high
32-bits are set to zero)
R Count of Link resets and LIPs
detected at this port. The
number times the reset link
protocol is initiated. These
are the count of the logical
resets, a count of the
number of primitives. Note,
this is a Fibre Channel only
stat.
FcConnUnitPo
rtStatCountRx
OfflineSequen
ces
Counter6
4
StOlssIn (Only supports low
32-bits of counter, high 32-bits
are set to zero)
R Count of Offline Primitive
OLS received at this port.
Note, this is a Fibre
Channel only stat.
FcConnUnitPo
rtStatCountTx
OfflineSequen
ces
Counter6
4
StOlssOut (Only supports
low 32-bits of counter, high
32-bits are set to zero)
R Count of Offline Primitive
OLS transmitted by this
port. Note, this is a Fibre
Channel only stat.
FcConnUnitPo
rtStatCountNu
mberOfflineSe
quences
Counter6
4
stOlssIn + stOlssOut (Only
supports low 32-bits of
counter, high 32-bits are set to
zero)
R Count of Offline Primitive
sequence received at this
port. Note, this is a Fibre
Channel only stat.
FcConnUnitPo
rtStatCountLin
kFailures
Counter6
4
stLinkFailures (Only supports
low 32-bits of counter, high
32-bits are set to zero)
R Count of link failures. This
count is part of the Link
Error Status Block (LESB).
(FC-PH 29.8). Note, this is
a Fibre Channel only stat.
FcConnUnitPo
rtStatCountInv
alidCRC
Counter6
4
stInvalidCrcs (Only supports
low 32-bits of counter, high
32-bits are set to zero)
R Count of frames received
with invalid CRC. This count
is part of the Link Error
Status Block (LESB). (FC-PH
29.8). Loop ports should
not count CRC errors
passing through when
monitoring. Note, this is a
Fibre Channel only stat.
FcConnUnitPo
rtStatCountInv
alidTxWords
Counter6
4
stInvalidTxWords (Only
supports low 32-bits of
counter, high 32-bits are set to
zero)
RCount of invalid
transmission words received
at this port. This count is
part of the Link Error Status
Block (LESB). (FC-PH 29.8).
Note, this is a Fibre
Channel only stat.