FW 05.01.00 and SW 07.01.00 HP StorageWorks SNMP Reference for Directors and Edge Switches Reference Guide (AA-RQ7BD-TE, June 2003)

SNMP Support
142 SNMP Reference for Directors and Edge Switches
Enterprise Specific Traps
fcEosTTADirec
tion
INTEGER PCP R This only applies when the alert type is a
Throughput Threshold Alert. It specifies the
throughput direction of the threshold.
(Transmit = 1, receive = 2, either = 3)
fcEosTTATrigg
erDuration
INTEGER PCP R This only applies when the alert type is a
Throughput Threshold Alert. It specifies the
amount of time during a threshold alert
interval that the trigger must be exceeded
before an alert is generated.
fcEosCTACou
nter
INTEGER PCP R This only applies when the alert type is a
Counter Threshold Alert. It specifies
statistical counter or counter set to be
monitored. (This object is not supported in
the current release.)
FCEOS MIB
Object
Name
Type
Number
Product Mapping
OID and
Value
Description
fcEosPortScn 1 Generated when Fibre
Channel port
operational state
changes.
fcEosPortOpSt
atus
An fcEosPortScn(1) is
generated whenever an
Fc_Port changes its
operational state. For
instance, the Fc_Port goes
from on-line to offline.
fcEosFruScn 2 Generated when FRU
operational state
changes.
fcEosFruStatus An fcEosFruScn(2) is
generated whenever a FRU
status changes its
operational state.
fcEosPortBindi
ngViolation
3 Generated when Port
binding violation
occurs.
fcEosPortAttac
hedWWN
An
fcEosPortBindingViolation(
3) is generated whenever
the switch detects that a
port binding violation
occurs.
fcEosThreshol
dAlert
4 Generated when
Threshold alert occurs.
fcEosPortIndex
, fcEosTAIndex
An fcEosThresholdAlert(4)
is generated whenever a
threshold alert occurs.