FW 05.01.00 and SW 07.01.00 HP StorageWorks SNMP Reference for Directors and Edge Switches Reference Guide (AA-RQ7BD-TE, June 2003)

Introduction to SNMP
19SNMP Reference for Directors and Edge Switches
Figure 2: Retrieving or setting values using MIBs
Standard MIBs
Standard MIBs are those available with SNMP and designed for standard
operation with a wide variety of managed devices. “SNMP Support” on page 21
describes the standard MIBs used by HP StorageWorks Directors, Edge Switches,
and the HA-Fabric Manager (HAFM) application.
Standard MIBs are:
■ MIB-II (Internet MIB) as described in RFC 1213: supported by all Directors
and Edge Switches.
■ Fibre Alliance (FCMGMT) MIB, version 3.1: supported by all Directors and
Edge Switches.
■ Fibre Channel Fabric Element (FCFE), version 1.10: supported by all
Directors, Edge Switches, and HAFM.